Firmware for android 2.2 Superpad/Flytouch 3 sku10206 and sku10304

[willPanda]

This firmware is for Superpad/Flytouch 3 sku10206 and sku10304 at pandawill.

Download firmware here :firmware for flytouch 3 MTP47.rar

Instruction:
1. Unzip the attachment and copy the files into a TF card.
2. Press and hold the key of volume down and power in the same time. The system will root by itself.

[Andriy]

Archive "firmware for flytouch 3 MTP47.rar" contains wrong firmware (may be for EKEN M009S), see archive content:

M009S_VT1609_1.5.5量产
FirmwareInstall
bin
env
packages
.config
autorun.sh
blacklist.txt
initrd.gz
kernel-logo.data
ramdisk.gz
u-boot.bin
u-boot-logo.data
u-boot-logo-ver.data
uzImage.bin
version
w-load.bin
w-load_DDR2_700M_800M_8bit_2_256MB_0160002.bin
w-load_DDR2_700M_800M_8bit_2_512MB_0160002.bin
w-load_DDR3_700M_1066M_16bit_1_256MB_0160002.bin
w-load_DDR3_700M_1066M_8bit_2_256MB_0160003.bin
w-load_DDR3_700M_1066M_8bit_2_512MB_0160002.bin

Check it, please.

[willPanda]

It is OK now. Please download again.

[Andriy]

It is OK now. Please download again.

It is not true, no change.
Firmware for android 2.2 Superpad/Flytouch 3 contain 2 files firmware-discovery and firmware2, in your archive more then 30 files.
Check it again, please.

[willPanda]

I will upload it again. It will take some time. The uploading speed is too too slow these days.

[Andriy]

This is a joke ?
Do you personally checked the archives ?
I repeat: Firmware for android 2.2 Superpad / Flytouch 3 contain 2 files firmware-discovery and firmware2.
In your archive more then 30 files.
Check it again, please.

[RuslanMG]

Andriy Please wait with patience. Pandawill WILL upload. So new archive will appears here soon.

[willPanda]

Thank you, RuslanMG. Andriy, please download again.

[Andriy]

Please, specify which files are needed for the firmware.
I think that 2 files: firmware-discovery and firmware2.
Yes or no ?

[Andriy]

Flytouch 3 have 2 modifications:

1. 9V power model “P041” with blue LED
2. 5V Flytouch 3, model “DISCO10” with green LED.

Now, your archive contain in “android” folder such files:

logo.bin
ramdisk.img
system.img
uImage
updater

It’s firmware for 9V Flytouch 3 (model “P041” with blue LED).
I have 5V Flytouch 3, (model “DISCO 10” with green LED), it requires a different Firmware (2 files: firmware-discovery and firmware2).

Firmware for 9V P041 and 5V DISCO is not compatible with each other.

Check it, please.