Welcome to the Pandawill Forum | Community for China Products Discussion.
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1

    help Pls, Flashed wrong uboot-nand

    Hello, me and a few others had false info to a firmware. Now we have a u-boot-nand.bin flashed the seemingly is not for the Flytouch2.

    The following is now, the vibrator is at once and the display remains black.
    We're not in recovery mode or in the UTG mode.

    can i flash a new/org uboot with a J-TAG connector again?

    sry for my english, is translated with google

    pls help us

  2. #2
    hi, please download the correct firmware and flash again.

  3. #3
    hi,

    i have tested some keybinds on the flytouch2 (with wrong uboot) when i press the "VOL+ VOL- POWER" have i a connect to pc with the burntool but when i click start to burn a uboot or something then i lost the connection. have anyone a idea?

    edit:
    when i hold the keybinds and then press start to flash, it works and flash all files.
    But only when i flash the uimage.img from the 28xx firmware have i the status bar on the pad. on the end comes the message "pls pull out otg ..." thats all ok but when i do that the screen is still back again. also i can burn files but everything is wrong i dont have any idea.

  4. #4
    Post Last Edit by nightchild79 at 2011-2-23 21:08

    **edit here the log status from burntool, i think i have problems with the memory address.
    i flashed the uboot image, linux kernel, linux sys, linux udat with burntool 0.7.2

    i have make a low quality video
    http://www.youtube.com/watch?v=da5fRWqk6aI


    FileLoad! szPathName: C:\Users\Nightchild\Desktop\GOME_Flytouch2_infomix _ix220_android\android\USBburntool\burn.ini
    [Nboot_DestAddr: 0x40007fc0 strNboot_DestAddr: 0x40007fc0]
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype1) hRead0x1a8)]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x32ed838 ]
    [UsbTxFile start! run_addr=0xffffffff]
    [UsbTxFile end]
    Find Device From Name
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype0) hRead0x1b0)]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x32ed838 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x33d0020 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x33d0020 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x32f0838 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    ReadFile 0x1b0
    UpdatePipeState: 0x600003c 6

  5. #5
    Post Last Edit by nightchild79 at 2011-2-23 23:01

    So i flashed the wron uboot again here the different

    wrong:
    Code:
    [Nboot_DestAddr: 0x40200000 strNboot_DestAddr: 0x40200000]
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype:(1) hRead:(0x1f4)]
    [SendUsbBuffer: run_flag = 2]
    Find Device From Name
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype:(0) hRead:(0x238)]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x2e7dc38 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    ReadFile  0x238
    UpdatePipeState: 0x6000000 6
    org:
    Code:
    [Nboot_DestAddr: 0x40200000 strNboot_DestAddr: 0x40200000]
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype:(1) hRead:(0x54c)]
    [SendUsbBuffer: run_flag = 2]
    Find Device From Name
    Opened successfully.
    Opened successfully.
    [SUCCESS: ReadFile otgtype:(0) hRead:(0x398)]
    [SUCCESS: CreateFile]
    [Memory Allocation! txBuf = 0x2e81150 ]
    [UsbTxFile start! run_addr=0x40200000]
    [UsbTxFile end]
    ReadFile  0x398
    UpdatePipeState: 0x6000000 6
    What can i do?

    I have no experience with Binaire files and hex edit or something
    Attached Files Attached Files

  6. #6
    Hi, please download the firmware and according the steps to reflash, something did wrong when you flashing it so shows the errors.

    Also, I'd like to know your order number.

  7. #7
    i flashed yesterday (on my girlfrendis birthday,she was angry) permamently 22 hours all firmware for the flytouch2. but nothing works, i used all burntools 0.72, 0.72 and the new IUW tool.
    a have after a reset everytime a black screen. only when i flash the uboot.img file from the "MID-2.1-update1_v1.9-2852-20110110" firmware i can see the status bar on the pad but afte reset is all back to black. i think he write the uboot.img wrong or nothing. can i do everything with a jtag cable or with the debug funktion in the burntool?

  8. #8
    now i used the burntool 0.7.41 from zt-180 (with passwort in settings what i have too)
    at the end i become a error code "failed: 0x3c" what means with this error
    i have flashed all frimwares for the flytouch but still back in black

    here the log:
    Code:
    Configure file: burn.ini FileLoad Faile or not exist, use default configure!strBootModle: 1 
    strNboot_RunType: 0 
    strNboot_DestAddr: 0x40200000 
    uboot:  D:\Daten\###Handy Software\FlyTouch2\Firmware\MID-2.1-update1_v1.9-2852-20110110\0.6.1.5_1.4.587_GT2005\u-boot.img 
    spl: D:\Daten\###Handy Software\FlyTouch2\Firmware\MID-2.1-update1_v1.9-2852-20110110\0.6.1.5_1.4.587_GT2005\u-boot-spl.bin 
    nk: C:\Users\Nightchild\Desktop\epad_256M_nand_android_2.2_0120_Public\Burn_with_USB\ 
    lk: D:\Daten\###Handy Software\FlyTouch2\Firmware\update1568\update\kernel.img 
    sys: D:\Daten\###Handy Software\FlyTouch2\Firmware\update 1480-android-winhex\android\system.img 
    udata: D:\Daten\###Handy Software\FlyTouch2\Firmware\update 1480-android-winhex\android\userdata.img 
    Configure value save to File burn.ini!!uboot:  D:\Daten\###Handy Software\FlyTouch2\Firmware\MID-2.1-update1_v1.9-2852-20110110\0.6.1.5_1.4.587_GT2005\u-boot.img 
    spl: D:\Daten\###Handy Software\FlyTouch2\Firmware\MID-2.1-update1_v1.9-2852-20110110\0.6.1.5_1.4.587_GT2005\u-boot-spl.bin 
    lk: D:\Daten\###Handy Software\FlyTouch2\Firmware\update1568\update\kernel.img 
    sys: D:\Daten\###Handy Software\FlyTouch2\Firmware\update 1480-android-winhex\android\system.img 
    udata: D:\Daten\###Handy Software\FlyTouch2\Firmware\update 1480-android-winhex\android\userdata.img 
    [0] Searched Device
    [0] close PIPE00
    [0] close PIPE01
    Opened successfully.
    Opened successfully.
    [0][get otg state 0x1]
    [0]show ePipeStatus 3
    [0]show ePipeStatus 0
    [0] Searched Device
    Opened successfully.
    Opened successfully.
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0][get otg state 0x1000000]
    [0]show ePipeStatus 1
    [0]show ePipeStatus 4
    [0]show ePipeStatus 5
    [0]show ePipeStatus 7
    [0]show ePipeStatus 8
    [0]show ePipeStatus 9
    [0]ulPreTag 0x23c ulUpdateTag 0x23c
    [0]show ePipeStatus 16
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0][get otg state 0x600003c]
    [0]ulUpdateTag 0x23c
    [0]show ePipeStatus 17

  9. #9
    Hi, i have to know your order number then could be able to forward this error info. to our supplier for a help.

  10. #10
    sry i don´t have a order number.


 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •