Ampe A90 Firmware Update Guide.

[Rafael Araújo Lehmkuhl]

Hi, I am with a similar problem.

I was trying to flash my ampe with the latest firmware, because the original was with some peoblems. After I flashed it, the android starts, but the touchscreen does not answer. I tried the last firmware, the v1.1 firmware, and none of them works. They install ok and the android starts fine, but the touchscreen doees not works.

Someone know what to do? Can I do some sort of factory reset, enter recovery mode or something like that?

[Meexit]

Are you sure you downloaded the right firmware ? this one : http://szampe.com/support_down.asp?id=757 ?

Maybe you made the confusion with a Sanei N90, or an Eken A90 tablet.

[Noobie]

Good day, dear Forum users!
I confess immediately I Russian, so I ask for my English don't scold!
Bought this "miracle" ampe a90, month worked fine and then became works bad top 1 cm of the touch pad.
But it is not the most important thing, I have a glitch firmware, now every time you restart it resets to factory settings!
I downloaded LiveSiit and even Phoenix pro but no program hasn't helped, I didn't Flash it does, I have windows xp sp3 when I run livesuite in Windows, no text, I had to put a tick "compatible with win 95" earned!
Now the text is visible, but when I try to Flash it as it costs me firmware keys set (Vol + and Power) hang livesuit and phoenix pro too, and so until I remove the usb cable.

Please tell me what drivers I somehow stuck but no stitches gonna help please can anyone already encountered this, I would be very grateful.

[SonA10]

I´ve got a Tablet AMPE A10, and I´ve got some of the problems you are talking about, but I´ve just make it. If some of you have an error code nº 10 in of your USB driver, don´t worry, cause if you follow the instructions in the right way, you´ll see that that´s not the problem. The important thing is to make the "VOL+ down, tap the POWER button about 7 times" in the right way till your PC detects your tablet.

I´ve tried a few times, and suddenly it worked. I´ve found a vid on youtube from Pandawill that helped me so much, to know the correct moment to do this. So, I´ll leave here the link for you to check it too. Good luck!

http://www.youtube.com/watch?v=ISx8csNmaBk

[gohawksgo]

how do I downloade livesuite?

[brdystyls]

Having issues. When I hold down Vol +, plug the usb in and press power 7 times. It connects for 1 second and shut down again. I get an error that the device has been disconnected and windows doesn't install the driver. I cannot get it to boot into recovery mode. Please help. Thank you.

[brdystyls]

Also, I am a noob to 3d output & android. How would one get that working? I do believe my tv is 3d compatible. Unsure how to set it up (eg hardware, software wise). Please help. Thanks again.

[SoulEdge]

Having issues. When I hold down Vol +, plug the usb in and press power 7 times. It connects for 1 second and shut down again. I get an error that the device has been disconnected and windows doesn't install the driver. I cannot get it to boot into recovery mode. Please help. Thank you.

I'm having the same issue. Ever get it figured out?

[robertsam]

Hello All,

My Ampe A10 3G Version having build number IMM761 SW:V0.5.3.0_S_ANPEI. I got Firmware from http://www.szampe.com/UploadFile/file/2011-08/0237.rar and did an update. Now my build version becomes IMM761 SW V0.3.9.0_ANPEI and the GREEN light always on the right upper part. Also it makes a small sound from the right upper corner. I understand from the Ampe site that I flashed with a wrong firmware instead of Ampe A10 Samsung Version. I got download my real firmware from http://www.szampe.com/support_down.asp?id=1016. How can I update to this version. I tried using the methos in this forum but only boot.img and recovery.img are coming while using Livesuite. Please Help me
thanks & regards,

[CarriePW]

usually there is a Chinese upgrade guide in the rom.
google translation can help you understand.